Composite Materials Lab at SU
What are Composites Current Research Projects Past Research Projects Current Student Research Undergraduate Research Projects Publications Laboratory Facilities Research Funding Consulting and Short Courses Professor Davidson's Homepage
Available Composite Publications
Jump to: 2000 and Prior

Recent Publications

Czabaj, M.W., Zehnder, A.T., Davidson, B.D., and Singh, A.K., "Compression Strength of Honeycomb-Stiffened Graphite/Epoxy Panels with Barely Visible Indentation Damage," Journal of Composite Materials, (In Press).

Johnston, A.L., Davidson, B.D. and Simon, K.K., "Assessment of Split-Beam-Type Tests for Mode III Delamination Toughness Determination," International Journal of Fracture, Volume 185, No. 1 - 2, 2014, pp. 31-48.

Singh, A.K., Davidson, B.D., Eisenberg, D.P., Czabaj, M.W. and Zehnder, A.T., "Damage Characterization of Quasi-Statically Indented Composite Sandwich Structures," Journal of Composite Materials, Vol. 47, No. 11, 2013, pp. 1211-1229.

Johnston, A.L. and Davidson, B.D., "Coupling of Planar Growth and Matrix Cracking in Mode III Delamination Toughness Testing," Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada, July 2013.

Hasseldine, B.P.J., Zehnder, A.T., Keating, B.D., Singh, A.K. and Davidson, B.D., "Compression After Impact of Thick Sandwich Composite Structures," Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, MA, April 2013.

Johnston, A.L., Davidson, B.D. and Simon, K.K., "Evaluation of New Test Methods for the Determination of GIIIc of Laminated Polymeric Composites," Proceedings of the 27th Annual American Society for Composites Technical Conference, Arlington, TX, October 2012.

Davidson, B.D. and Sediles, F.O., "Mixed-Mode I-II-III Delamination Toughness Determination Via a Shear-Torsion-Bending Test," Composites Part A, Vol. 42, No. 6, 2011, pp. 589-603.

Singh, A.K. and Davidson, B.D., "Effects of Temperature, Seawater and Impact on the Strength, Stiffness and Life of Sandwich Composites," Journal of Reinforced Plastics and Composites, Vol. 30, No. 3, 2011, pp. 269-277.

Davidson, B.D., Humphreys, K.D., Sediles, F.O. and Simon, K.K., "A Modified Shear-Torsion-Bending (STB) Test for Determination of the Mixed-Mode I-II-III Toughness of Laminated Composites," Proceedings of the 2011 ASME Applied Mechanics and Materials Conference, 2011, Chicago, IL, May 31 - June 2, 2011.

Czabaj, M.W., Tubbs, W.R., Zehnder, A.T. and Davidson, B.D., "Compression/Shear Response of Honeycomb Core: Experiments and Modeling," Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Uncasville, Connecticut, June 2011.

Davidson, B.D. and Teller, S.S., "Recommendations for an ASTM Standardized Test for Determining GIIc of Unidirectional Laminated Polymeric Matrix Composites," Journal of ASTM International, Vol. 7, No. 2, 2010, pp. 1-11.

Bing, Q. and Davidson, B.D., "An Improved Methodology for Measuring the Interfacial Toughness of Sandwich Beams" Major Accomplishments in Composite Materials and Sandwich Structures - An Anthology of ONR Sponsored Research, I.M. Daniel, E.E. Gdoutos and Y.D.S. Rajapakse, Eds., Springer, 2010, pp. 365-380

Davidson, B.D., "Delamination Toughness Characterization of Composite Materials," Encyclopedia of Aerospace Engineering, R. Blockley and W. Shyy, Eds, John Wiley & Sons, Chichester UK, 2010, pp. 1899-1910.

Davidson, B.D. and Singh, A.K., "Effects of Subzero Temperatures, Seawater Immersion and Low-Velocity Impact on Flexural Strength, Stiffness and Life of Sandwich Composites," Proceedings of the 25th Annual American Society for Composites Technical Conference, Dayton, Ohio, September 2010.

Davidson, B.D., Sediles, F.O. and Humphreys, K.D., "A Shear-Torsion-Bending Test for Mixed-Mode I-II-III Delamination Toughness Determination," Proceedings of the 25th Annual American Society for Composites Technical Conference, Dayton, Ohio, September 2010.

Czabaj, M.W., Zehnder, A.T., Davidson, B.D., Singh, A.K. and Eisenberg, D.P., "Combined Experimental/Numerical Assessment of Compression After Impact of Sandwich Composite Structures," Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Indianapolis, Indiana, June 2010 (In Experimental and Applied Mechanics, Volume 6: Conference Proceedings of the Society for Experimental Mechanics Series, Volume 17, 2011, pp. 793-800).

Singh, A.K., Davidson, B.D., Eisenberg, D.P., Czabaj, M.W. and Zehnder, A.T., "Barely Visible Impact Damage Evaluation of Composite Sandwich Structures," Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, Florida, April 2010.

Czabaj, M.W., Zehnder, A.T., Davidson, B.D., Singh, A.K. and Eisenberg, D.P., "Compression After Impact of Sandwich Composite Structures: Experiments and Modeling," Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, Florida, April 2010.

Davidson, B.D., Soffa, M.A. and Kumar, M., "Temperature and Moisture Effects in a Particulate Interlayered Composite: Mode I Data Reduction and Toughness," Journal of Reinforced Plastics and Composites Vol. 28, No. 17, 2009, pp. 2049-2068.

Davidson, B.D., Bansal, A., Bing, Q. and Sun, X., "Geometrically Nonlinear Determination of Energy Release Rate and Mode Ratio in Single Leg Bending Tests," Journal of Reinforced Plastics and Composites, Vol. 28, No. 15, 2009, pp. 1881-1901.

Davidson, B.D., Kumar, M. and Soffa, M.A., "Influence of Mode Ratio and Hygrothermal Condition on the Delamination Toughness of a Thermoplastic Particulate Interlayered Graphite/Epoxy Composite," Composites Part A, Vol. 40, No. 1, 2008, pp. 67-79.

Davidson, B.D., Bansal, A., Bing, Q. and Sun, X., "Linear and Nonlinear Analyses of Unidirectional, Symmetric Single Leg Four-Point Bending Tests," Engineering Fracture Mechanics Vol. 75, No. 8, 2008, pp. 2130-2143.

Rice, D.J., Davidson, B.D., Dannenhoffer, J.F. and Gay, G.K., "Improving the Effectiveness of Virtual Teams by Adapting Team Processes," Computer Supported Cooperative Work Vol. 16, 2007, pp. 567-594..

Zehnder, A.T., Ingraffea, A.R., Gay, G. Stefanone, M., Davidson, B.D., Dannenhoffer, J. and Rice, D., "On Synchronous, IP-Based, Collaborative Engineering Design Education," Distance Education Issues and Challenges, Nova Science Publishers, Inc., A.V. Morales, Ed., 2007, pp. 7-30.

Perez, C.L. and Davidson, B.D., "Evaluation of Precracking Methods for the End Notched Flexure Test," AIAA Journal Vol. 45, No. 11, 2007, pp. 2603-2611.

Cho, H.C., Gay, G., Davidson, B.D. and Ingraffea, A., "Social Networks, Communication Styles, and Learning Performance in a CSCL," Journal of Computers and Education, Vol. 49, 2007, pp. 309-329.

Davidson, B.D., Sun, X. and Vinciquerra, A.J., "Influences of Friction, Geometric Nonlinearities, and Fixture Compliance on Experimentally Observed Toughnesses from Three and Four Point Bend End Notched Flexure Tests," Journal of Composite Materials, Vol. 41, No. 10, 2007, pp. 1177-1196.

Davidson, B.D. and Zhao, W., "An Accurate Mixed-Mode Delamination Failure Criterion for Laminated Fibrous Composites Requiring Limited Experimental Input," Journal of Composite Materials, Vol. 41, No. 6, 2007, pp. 679-702.

Teller, S.S. and Davidson, B.D., "Variability in Mixed-Mode Delamination Toughness with Implications for Research and Practical Applications," Proceedings of the 45th AIAA Aerospace Sciences Meeting and Exhibit, Paper No. AIAA-2007-0160, Reno, Nevada, January 2007.

Davidson, B.D. and Sun, X., "Geometry and Data Reduction Recommendations for a Standardized End Notched Flexure Test for Unidirectional Composites," Journal of ASTM International, Vol. 3 No. 9, 2006 (on-line only at http://journalsip.astm.org/JOURNALS/JAI/PAGES/101.htm)

Sun, X. and Davidson, B.D., "Numerical Evaluation of the Effects of Friction and Geometrical Nonlinearities on Three and Four Point Bend End Notched Flexure Test Results," Engineering Fracture Mechanics, Vol. 73, No. 10, 2006, pp. 1343-1361.

Davidson, B.D., Bialaszewski, R.D. and Sainath, S.S., "A Non-Classical, Energy Release Rate Based Approach for Predicting Delamination Growth in Graphite Reinforced Laminated Polymeric Composites," Composites Science and Technology, Vol. 66, No. 10, 2006, pp. 1479-1496.

Davidson, B.D., "Towards an ASTM Standardized Test for Determining GIIc of Unidirectional Laminated Polymeric Matrix Composites," 21st Annual American Society for Composites Technical Conference, Dearborn, MI, September 2006.

Soffa, M.A., Davidson, B.D. and Kumar, M. "Mode I Toughness of a Particulate Interlayered Composite as a Function of Moisture and Temperature," 21st Annual American Society for Composites Technical Conference, Dearborn, MI, September 2006.

Perez, C.L. and Davidson, B.D., "Evaluation of Precracking Methods for the End Notched Flexure Test," Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, May 2006.

Davidson, B.D. and Yu, L., "Energy Release Rate Prediction in Stiffened-Skin Structure Using a Three Dimensional Crack Tip Element Analysis," Journal of Composite Materials, Vol. 39, No. 20, 2005, pp. 1819-1842.

Wang, X., Dannenhoffer, J.F., Davidson, B.D and Spector, J.M., "Design Issues in a Cross-Institutional Collaboration on a Distance Education Course," Distance Education, Volume 26, No. 3, 2005, pp. 405-423.

Davidson, B.D. and Sun, X., "Effects of Friction, Geometry and Fixture Compliance on the Perceived Toughness from Three and Four Point Bend End Notched Flexure Tests," Journal of Reinforced Plastics and Composites, Vol. 24, No. 15, 2005, pp 1611-1628.

Davidson, B.D., Yu, L., Lundberg, S.D. and Rao, L.M., "Accuracy Assessment of a Three-Dimensional, Crack Tip Element Based Approach for Predicting Delamination Growth in Stiffened-Skin Geometries," International Journal of Fracture, Vol. 132, No. 1, 2005, pp. 1-32.

Vinciquerra, A.J. and Davidson, B.D., "Effect of Crack Length Measurement Technique and Data Reduction Procedures on the Perceived Toughness from Four-Point Bend End-Notched Flexure Tests," Journal of Reinforced Plastics and Composites, Vol. 23, No. 10, 2004, pp. 1051-1062.

Davidson, B.D. and Sun, X., "Effects of Friction, Geometry and Fixture Compliance on the Perceived Toughness from Three and Four Point Bend End Notched Flexure Tests," Proceedings of the 19th Annual American Society for Composites Technical Conference, Atlanta, Georgia, October 2004.

Lux, J.R. and Davidson, B.D., "Guidelines for the Development of Computer-Based Instruction Modules for Science and Engineering," Educational Technology Research & Development, Vol. 6, No. 4, 2003, pp. 125-133 (available at http://ifets.ieee.org/periodical/6_4/12.pdf)

Davidson, B.D., Dannenhoffer, J.F., Ingraffea, A., Jones, S. and Zehnder, A., "Facilitating Effective, Geographically Distributed Engineering Design Teams"" Proceedings of the 33rd ASEE/IEEE Frontiers in Education Conference, Boulder, Colorado, November 2003.

Dannenhoffer, J.F., Davidson, B.D., Ingraffea, A., Jones, S. and Zehnder A., "A Case Study on Educating Engineers for Geographically-Dispersed Design Teams," Proceedings of the 2003 International Mechanical Engineering Congress and R&D Exposition, Paper IMECE2003-41530, Washington, D.C., November 2003.

Ohrazda, C., Koszalka, T., Davidson, B.D., Rice D.J. and X. Wang, "An Advanced Interactive Discovery Environment for Collaborative, Multi Disciplinary Design in Education," Proceedings of the Association for Educational Communications and Technology, Anaheim CA, October 2003.

Lee, J-S., Co, H.C., Gay, G., Davidson, B.D. and Ingraffea, A.R., "Technology Acceptance and Social Networking in Distance Learning," Educational Technology and Society, Volume 6, No. 2, 2003, pp 60-61 (available at http://ifets.ieee.org/periodical/6-2/incex.html).

Davidson, B.D., Dannenhoffer, J.F., Gay, G., Ingraffea, A., Jones, S., Lee, J-S., Stefanone, M. and Zehnder, A., "On the Use of Advanced IT Tools to Facilitate Effective, Geographically Distributed Student Design Teams," Proceedings of the 2003 ASEE Annual Conference, Nashville, Tennessee, June 2003.

Lux, J.R. and Davidson, B.D., "A Prototype Structural Analysis Review and Tutorial (START) Computer Based Instruction Module," Proceedings of the World Conference on Educational Multimedia, Hypermedia & Telecommunications (ED-MEDIA 2003), Honolulu, Hawaii, June 2003.

Davidson, B.D., Danenhoffer, J.F., Ingraffea, A., Jones, S. and Zehnder, A., "Facilitating Effective, Geographically Distributed Engineering Design Teams," Proceedings of the 2003 Frontiers in Education Conference, Boulder, Colorado, November 2003.

Davidson, B.D., Dannenhoffer, J.F., Ingraffea, A., Jones, S. and Zehnder, A., "On Educating Engineers for Geographically Dispersed Design Teams," Proceedings of the International Mechanical Engineering Congress and R&D Exposition, Washington, D.C., November 2003.

Davidson, B.D., Davidson, R., Gay, G., Ingraffea, A., Miller, M., Nozick, L., Zehnder, A., Sheckler, R., Rath, C., "Distance Design Collaboration Through an Advanced Interactive Discovery Environment," Proceedings of the 2002 ASEE Annual Conference & Exposition, Session 1302, Montreal, Quebec, Canada, June 2002.

Vinciquerra, A.J. and Davidson, B.D., "Effect of Crack Length Measurement Technique and Data Reduction Procedures on the Perceived Toughness from Four-Point Bend End-Notched Flexure Tests," Proceedings of the 17th Annual American Society for Composites Technical Conference, Paper No. 182, C.T. Sun and H. Kim, Eds., CRC Press (CD Version of Proceedings Only), October 2002.

Davidson, B.D.,Davidson, R., Gay, G., Ingraffea, A., Miller, M., Nozick, L., Zehnder, A., Sheckler, R., Rath, C., "Collaborative Distance Design of Aerospace Structures," Proceedings of the 32nd ASEE/IEEE Frontiers in Education Conference, Boston, MA, November 2002.

Vinciquerra, A.J., Davidson, B.D., Schaff, J.R. and Smith, S.L., "Determination of the Mode II Fatigue Delamination Toughness of Laminated Composites," Journal of Reinforced Plastics and Composites, Vol. 21, No. 7, 2002, pp. 663-677.

Rao, L.M. and Davidson, B.D., "Assessment of a Crack Tip Element Based Approach for Predicting Delamination Growth in Interlayer Toughened Composite Skin-Stringer Panels," Federal Aviation Administration Document DOT/FAA/AR-02/102, December 2002.

Davidson, B.D., "A Predictive Methodology for Delamination Growth in Laminated Composites " Part II: Analysis, Applications, Accuracy Assessment and Recommendations," Federal Aviation Administration Document DOT/FAA/AR-01/56, October 2001 (available at http://aar400.tc.faa.gov/aar-430/reports/aar.htm).

Gratz, K.R. and Davidson, B.D., "A Combined Tension-Bending Test for Assessing Mixed-Mode Delamination Growth Predictions," AIAA Paper No. 2001-1448, Proceedings of the 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA Electronic Publications, 2001.

Yu, L. and Davidson, B.D., "A Three-Dimensional Crack Tip Element for Energy Release Rate Determination in Layered Elastic Structures," Journal of Composite Materials, Vol. 35, No. 6, 2001, pp. 457-488.

<Goto top>

2000 and Prior Publications

Beattie, D., Davidson, B., Jacobson, D. and Feezor, C., "The Role of Mechanical Modeling in Assessing Behavior of Diseased Arteries During Clinical Intervention," Proceedings of the 11th International Conference on Mechanics in Medicine and Biology, 2000, pp. 69-71.

Davidson, B.D., Gharibian, S.J. and Yu, L., "Evaluation of Energy Release Rate-Based Approaches for Predicting Delamination Growth in Laminated Composites," International Journal of Fracture, Vol. 105, No. 4, 2000, pp. 343-365.

Davidson, B.D., Yu, L. and Hu, H., "Determination of Energy Release Rate and Mode Mix in Three-Dimensional Layered Structures Using Plate Theory," International Journal of Fracture, Vol. 105, No. 1, 2000, pp. 81-104.

Polaha, J.J. and Davidson, B.D., "Test Procedures for Determining the Delamination Toughness of Ceramic Matrix Composites as a Function of Mode Ratio, Temperature, and Layup," Mechanical, Thermal and Environmental Testing and Performance of Ceramic Composites and Components, ASTM STP 1392, M.G. Jenkins, E. Lara-Curzio and S.T. Gonczy, Eds., American Society for Testing and Materials, 2000, pp, 31-47.

Schuecker, C. and Davidson, B.D., "Effect of Friction on the Perceived Mode II Delamination Toughness from Three- and Four-Point Bend End-Notched Flexure Tests," Composite Structures: Theory and Practice, ASTM STP 1383, P. Grant and C.Q. Rousseau, Eds., American Society for Testing and Materials, 2000, pp. 334-344.

Schuecker, C. and Davidson, B.D., "Evaluation of the Accuracy of the Four-Point Bend End-Notched Flexure Test for Mode II Delamination Toughness Determination," Composites Science and Technology, Vol. 60, 2000, pp. 2137-2146.

Vinciquerra, A.J., Davidson, B.D., Schaff, J.R. and Smith, S.L., "An Improved Methodology for the Determination of Mode II Fatigue Delamination Growth Rates Using the End-Notched Flexure Test," Proceedings of the 15th Annual American Society for Composites Technical Conference, O.O. Ochoa, T.K. O'Brien, D. Lagoudas and H.J. Sue, Eds., Technomic Publishing Co., 2000, pp. 999-1007.

Davidson, B.D. and Koudela, K.L., "Influences of the Mode Mix of Precracking on the Delamination Toughness of Laminated Composites," Journal of Reinforced Plastics and Composites, Vol. 18, No. 15, 1999, pp. 1408-1414.

Davidson, B., Roy, U. and Ludden, C., "An Expert System for the Design and Analysis of Composite Structures," IIE Transactions, Vol. 31, No. 4, 1999, pp. 303-312.

Martin R.H., and Davidson, B.D., "Mode II Fracture Toughness Evaluation Using a Four Point Bend End-Notched Flexure Test," Plastics, Rubber and Composites, Vol. 28, No. 8, 1999, pp. 401-406.

Davidson, B.D., "A Predictive Methodology for Delamination Growth in Laminated Composites; Part I: Theoretical Development and Preliminary Experimental Results," Federal Aviation Administration Document DOT/FAA/AR-97/87, April 1998.

Hudson, R.C., Davidson, B.D. and Polaha, J.J., "Effect of Remote Ply Orientation on the Perceived Mode I and Mode II Toughness of θ/θ and θ/-θ Interfaces , " Applied Composite Materials, Vol. 5, No. 2, 1998, pp. 123-138.

Pieracci, A., Davidson, B.D. and Sundararaman, V., "Nonlinear Analysis of Homogenous, Symmetrically Delaminated Single Leg Bending Specimens," Journal of Composites Technology and Research, Vol. 20, No. 3, 1998, pp. 170-178.

Sundararaman, V. and Davidson, B.D., "An Unsymmetric End-Notched Flexure Test for Interfacial Fracture Toughness Determination," Engineering Fracture Mechanics, Vol. 60, No. 3, pp. 361-377, 1998.

Bhashyam, S. and Davidson, B.D., "Evaluation of Data Reduction Methods for the Mixed-Mode Bending Test," AIAA Journal, Vol. 35, No. 3, 1997, pp. 546-552.

Davidson, B.D., Fariello, P.L., Hudson, R.C. and Sundararaman, V., "Accuracy Assessment of the Singular Field-Based Mode Mix Decomposition Procedure for the Prediction of Delamination," Composite Materials: Testing and Design (Thirteenth Volume), ASTM STP 1242, S.J. Hooper, Ed., American Society for Testing and Materials, 1997, pp. 109-128.

Martin, R.H. and Davidson, B.D., "Mode II Fracture Toughness Evaluation Using a Four Point Bend End Notched Flexure Test," Proceedings of the Fourth International Conference on Deformation and Fracture of Composites, Manchester, UK, 1997, pp. 243-252.

Polaha, J.J., Sherwood, T.W. and Davidson, B.D., "Effects of Temperature and Layup on the Mixed-Mode Delamination Toughness of a Ceramic Matrix Composite Material," Proceedings of the Eleventh International Conference on Composite Materials, Paper No. 2518/0319, 1997.

Schaff, J.R. and Davidson, B.D., "A Strength-Based Wearout Model for Predicting the Life of Composite Structures," Composite Materials: Fatigue and Fracture (Sixth Volume), ASTM STP 1285, E.A. Armanios, Ed., American Society for Testing and Materials, 1997, pp. 179-200.

Schaff, J.R. and Davidson, B.D., "Life Prediction Methodology for Composite Structures, Part I: Constant Amplitude and Two-Stress Level Fatigue," Journal of Composite Materials, Vol. 31, No. 2, 1997, pp. 128-157.

Schaff, J.R. and Davidson, B.D., "Life Prediction Methodology for Composite Structures, Part II: Spectrum Fatigue," Journal of Composite Materials, Vol. 31, No. 2, 1997, pp. 158-181.

Sundararaman, V. and Davidson, B.D., "An Unsymmetric Double Cantilever Beam Test for Interfacial Fracture Toughness Determination," International Journal of Solids and Structures, Vol. 34, No. 7, 1997, pp. 799-817.

Bhashyam, S. and Davidson, B.D., "An Evaluation of Data Reduction Methods for the Mixed-Mode Bending Test," Proceedings of the 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 2, Salt Lake City, Utah, April 1996, pp. 886-896.

Dang, T.Q., LaGraff, J.E., Spina, E.F., and Davidson, B.D., Research and Educational Activities at the NASA / Syracuse University Center For Hypersonics." AIAA Paper No. 96-4578, Presented at the Seventh AIAA International Space Planes and Hyper sonics Systems and Technologies Conference, Norfolk, VA, November 1996.

Davidson, B.D., "Analytical Determination of Mixed-Mode Energy Release Rates for Delamination Using a Crack Tip Element," in Key Engineering Materials, Volumes 121-122: Fracture of Composites, E.A. Armanios, Ed., Transtec Publications, Ltd., Switz erland, 1996, pp. 161-180.

Davidson, B.D., "An Engineering Methodology for Delamination Growth Assessment,"Proceedings of the 11th DoD/NASA/FAA Conference on Fibrous Composites in Structural Design, Vol. II, Wright Laboratory Report WL-TR-97-3009, October 1996, pp. IX-25 - IX-39.

Davidson, B.D., Altonen, C.S. and Polaha, J.J., "Effect of Stacking Sequence on Delamination Toughness and Delamination Growth Behavior in Composite End-Notched Flexure Specimens," Composite Materials: Testing and Design (Twelfth Volume), ASTM STP 1274, R.B. Deo and C.R. Saff, Eds., American Society for Testing and Materials, 1996, pp. 393-413.

Davidson, B.D., Hu, H. and Yan, H., "An Efficient Procedure for Determining Mixed-Mode Energy Release Rates in Practical Problems of Delamination," Finite Elements in Analysis and Design, Vol. 23, 1996, pp. 193-210.

Davidson, B.D., Krüger, R. and König, M., "Effect of Stacking Sequence on Energy Release Rate Distributions in Multidirectional DCB and ENF Specimens," Engineering Fracture Mechanics, Vol. 55, No. 4, 1996, pp. 557-569.

Davidson, B.D. and Sundararaman, V., "A Single Leg Bending Test for Interfacial Fracture Toughness Determination," International Journal of Fracture, Vol. 78, No. 2, 1996, pp 193-210.

Polaha, J.J., Davidson, B.D., Hudson, R.C. and Pieracci, A. "Effects of Mode Ratio, Ply Orientation and Precracking on the Delamination Toughness of a Laminated Composite," Journal of Reinforced Plastics and Composites, Vol. 15, No.2, 1996, pp. 141 -173.

Davidson, B.D., "Prediction of Energy Release Rate for Edge Delamination Using a Crack Tip Element Approach," Composite Materials: Fatigue and Fracture, Fifth Volume, ASTM STP 1230, R.H. Martin, Ed., American Society for Testing and Materials, 1995, pp. 155-175.

Davidson, B.D. and Hu, H., "Effect of Interlayer Modulus on Fracture Mode Ratio for Interleaved Composite Laminates," Engineering Fracture Mechanics, Vol. 52, No. 2, 1995, pp. 243-253.

Davidson, B.D., Hu, H. and Schapery, R.A., "An Analytical Crack Tip Element for Layered Elastic Structures," Journal of Applied Mechanics, Vol. 62, No. 6, 1995, pp. 294-305.

Davidson, B.D. and Krafchak, T.M., "A Comparison of Energy Release Rates for Locally Buckled Laminates Containing Symmetrically and Asymmetrically Located Delaminations," Journal of Composite Materials, Vol. 29, No. 6, 1995, pp. 700-713.

Davidson, B.D., Krüger, R. and König, M., "Three Dimensional Analysis and Resulting Design Recommendations for Unidirectional and Multidirectional End-Notched Flexure Tests," Journal of Composite Materials, Vol. 29, No. 16, 1995, pp. 2108 -2133.

Davidson, B.D., Krüger, R. and König, M., "Three Dimensional Analysis of Center Delaminated Unidirectional and Multidirectional Single Leg Bending Specimens," Composites Science and Technology, Vol. 54, No. 4, 1995, pp. 385 394.

Hudson, R.C., Davidson, B.D. and Polaha, J.J., "Effect of Remote Ply Orientation on the Perceived Mode I and Mode II Toughness of θ/θ and θ/-θ," Proceedings of the Tenth International Conference on Composite Materials, Vol. I: Fatigue and Fracture, A. Poursartip and K. Street, Eds., August 1995, pp. 133-140.

Spina, E.F., Lagraff, J.E., Davidson, B.D., Bogucz, E.A. and Dang, T.Q., "Research and Educational Initiatives at the Syracuse University Center for Hypersonics," AIAA paper no. 95-6107, Presented at the Sixth AIAA International Aerospace Plane and Hypersonic Technologies Conference, Chattanooga, TN, April 1995.

Sundararaman, V. and Davidson, B.D., "New Test Methods for Determining Fracture Toughness as a Function of Mode Mix for Bimaterial Interfaces," Application of Fracture Mechanics in Electronic Packaging and Materials, EEP Vol. 11/MD-Vol. 64, T.Y. Wu , W.T. Chen, R.A. Pearson and D.T. Read, Eds., American Society of Mechanical Engineers, 1995, pp. 141-154.

Davidson, B.D., "Energy Release Rate Determination for Edge Delamination Under Combined In-Plane, Bending and Hygrothermal Loading - Part I: Delamination at a Single Interface," Journal of Composite Materials, Vol. 28, No. 11, 1994, pp. 1009-1031.

Davidson, B.D., "Energy Release Rate Determination for Edge Delamination Under Combined In-Plane, Bending and Hygrothermal Loading - Part II: Two Symmetrically Located Delaminations," Journal of Composite Materials, Vol. 28, No. 14, 1994, pp. 1371- 1392.

Davidson, B.D., "Prediction of Delamination Growth in Laminated Structures," Failure Mechanics in Advanced Polymeric Composites, AMD-Vol. 196, G.A. Kardomateas and Y.D.S. Rajapakse, Eds., American Society of Mechanical Engineers, 1994, pp. 43-65.

Davidson, B.D. and Ferrie, C.H., "Effect of Stretching-Shearing Coupling on Instability-Related Delamination Growth," Composite Structures, Vol. 29, No. 4, 1994, pp. 383-392.

Davidson, B.D. and Petra, J.M., "Effect of Open Holes on the Compression Fatigue Behavior of Composite Tubes," Proceedings of the 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 1994, pp. 792-802.

Schaff, J.R. and Davidson, B.D., "Life Prediction for Composite Laminates Subjected to Spectrum Fatigue Loading," Durability of Composite Materials, MD-Vol. 51, R.C. Wetherhold, Ed., American Society of Mechanical Engineers, 1994, pp. 89-109.

Davidson, B.D. and Krafchak, T.M., "Analysis of Instability-Related Delamination Growth Using a Crack Tip Element," AIAA Journal, Vol. 31, No. 11, 1993, pp. 2130-2136.

Davidson, B.D. and Krafchak, T.M., "Mixed-Mode Energy Release Rate Determination for Delamination Buckling Using a Crack Tip Element," Proceedings of the 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 19 93, pp. 1302-1309.

Krafchak, T.M., Petra, J-M., Davidson, B.D. and Chen, G-S. "Effect of Impact Damage on the Compression Fatigue Behavior of Composite Tubes," Proceedings of the 34th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, April 1993, pp. 859-866.

Ludden, C., Roy, U. and Davidson, B., "Preliminary Design of Laminated Composite Plates Using an Automated System," SPIE Vol. 1963, Applications of Artificial Intelligence 1993: Knowledge-Based Systems in Aerospace and Industry, April 1993, pp. 149-159.

Michaels, T.E. and Davidson, B.D., "Ultrasonic Inspection Detects Hidden Damage in Composite Materials," Advanced Materials and Processes, Vol. 143, No. 3, March 1993, pp. 34-38.

Davidson, B.D., Michaels, J.E., Sundararaman, V. and Michaels, T.E., "Ultrasonic Imaging of Impact Damaged Composite Panels," Acoustical Imaging, Volume 19, H. Ermert and H.-P. Harjes, Eds., Plenum Press, 1992, pp. 589-594.

Michaels, T.E., Krafchak, T.M. and Davidson, B.D., "Ultrasonic Inspection of Thin Walled Composite Tubes," Review of Progress in Quantitative Nondestructive Evaluation, Volume 12, D.O. Thompson and D.E. Chimenti, Eds., Plenum Press, 1992.

Davidson, B.D., "Delamination Buckling: Theory and Experiment," Journal of Composite Materials, Volume 25, No. 10, 1991, pp. 1351-1378.

Davidson, B.D., "An Analytical Investigation of Delamination Front Curvature in Double Cantilever Beam Specimens," Journal of Composite Materials, Volume 24, No. 11, 1990, pp. 1124-1137.

Davidson, B.D., "An Experimental Investigation of Delamination Buckling and Growth," Proceedings of the 31st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 1990, pp. 1218-1226.

Davidson, B.D. and Schapery, R.A., "A Technique for Predicting Mode I Energy Release Rates Using a First Order Shear Deformable Plate Theory," Engineering Fracture Mechanics, Vol. 36, No. 1, 1990, pp. 157-165.

Schapery, R.A. and Davidson, B.D., "Prediction of Energy Release Rate for Mixed-Mode Delamination Using Classical Plate Theory," Applied Mechanics Reviews, Volume 43, No. 5, 1990, pp. s281-s287.

Davidson, B.D., "On Modelling the Residual Strength of Impact Damaged, Compression Loaded Laminates," Proceedings of the 21st International Sampe Technical Conference, September 1989, pp. 109-119.

Davidson, B.D. and Schapery, R.A., "Effect of Finite Width on Deflection and Energy Release Rate of an Orthotropic Double Cantilever Specimen," Journal of Composite Materials, Volume 22, No. 7, 1988, pp. 640-656.

<Goto top>

Barry D. Davidson, bddavids@syr.edu